When using phenyl silicone gel, several key steps must be observed. First, ensure that the materials to be bonded are thoroughly cleaned, dry, and free of contaminants. Next, mix components A and B in a 1:1 weight ratio, and it is recommended to degas under vacuum to eliminate bubbles before applying to the target component. Heating during curing can significantly improve production rates and adhesion between substrates, thereby enhancing overall product performance.

It's also important to note that the mixed gel should be used at once to avoid waste. Moreover, if the gel comes into contact with certain organic compounds and heavy metal ions, such as N, P, S elements, or Sn, Pb, Hg, As, it may lead to poor curing; therefore, these substances should be kept away. Before use, the product should remain sealed and stored in a dark place to extend its shelf life.



Phenyl silicone gel,pls check IOTA 3128