When using IOTA 6650OCR, several operational points should be noted: Before encapsulation, clean the screen surface of oil, dust, and other contaminants using solvents like alcohol or acetone to ensure proper adhesion. The A and B components must be mixed in a 1:1 ratio by weight or volume, either manually or using equipment. After mixing, the product should be immediately poured, as it cures quickly. For optimal sealing, it is recommended to remove bubbles in a vacuum environment. Incorrect mixing ratios may result in a gel that is either too soft or too hard, so it's important to strictly follow the 1:1 ratio.

The curing speed of IOTA 6650OCR depends solely on temperature, and increasing the temperature will accelerate the process. However, care must be taken to avoid contact with materials containing nitrogen (N), phosphorus (P), sulfur (S), or other elements, as these can inhibit curing. Any unused A and B components should be sealed properly to prevent exposure to air and moisture.

IOTA 6650OCR is a safe silicone material, free from toxic or corrosive substances. However, general industrial hygiene practices should still be followed, such as wearing protective gloves for prolonged or repeated contact. During storage, keep the product away from heat, sparks, and open flames, and ensure containers are tightly sealed. Use explosion-proof electrical, ventilation, and lighting equipment. The product can be transported as a non-hazardous material, making it convenient and safe for handling.




Silicone Gel,pls check IOTA 6650OCR