The introduction of two-component organic silicon gel IOTA 6250N/6250M brings high-quality choice for electronic component encapsulation. Standardized operation and reasonable storage and transportation are key to ensuring optimal product performance and ensuring production safety.
In terms of operation and safety, components A and B should be thoroughly mixed in a 1:1 ratio before use, and the stirring time should reach 5 minutes. To ensure the sealing effect, it is recommended to defoam under a vacuum of -0.09MPa~-0.08MPa for 5-10 minutes before use. The curing time is closely related to temperature, and it does not flow after 120 minutes at 25 β; At 120 β, it can be fully cured in 30 minutes. It should be noted that the mixed adhesive should be stored in a sealed manner and used up within the safe operating period, otherwise the adhesive will slowly solidify and cause waste. At the same time, the curing speed will slow down when the temperature is low, and it can be adjusted reasonably according to the actual situation during the production process. Although this product is not a hazardous material, it should not be ingested or seen.
If accidentally splashed, rinse immediately with plenty of water. In addition, both components A and B of the colloid must be sealed and stored, and care should be taken to avoid leakage during transportation. It is particularly important to avoid contact with organic compounds such as N, P, S, ionic compounds containing heavy metals such as Sn, Pb, Hg, Sb, Bi, As, and organic compounds containing unsaturated groups such as acetylene during the vulcanization process of this product. Otherwise, it may cause poor curing of the adhesive. Therefore, it is necessary to conduct compatibility tests between the silicone rubber and the substrate before use.
In terms of packaging, IOTA 6250N/6250M offers two specifications: A/B component 20KG and A/B component 200KG, which can meet the needs of different production scales. When storing, the product should be placed in a dry place for a storage period of 12 months. After expiration, it needs to be retested and can only be used again after passing the inspection. This type of product belongs to non hazardous goods and can be transported as a general chemical, providing convenience for the transportation process.
IOTA 6250N/6250M organosilicon gel, with its excellent performance and perfect operation and storage specifications, injects new vitality into the production of electronic industry. It is believed that it will play an important role in the field of electronic component encapsulation.
To learn more, please click
IOTA6250M
