Recently, IOTA 6650OCR, a two-component addition molding organic silicon gel specially made for full fitting of various screens, officially entered the market. With its excellent performance characteristics, it brings new options for the production and processing of display devices such as vehicle screens, computer screens, and flat screens.
IOTA 6650OCR stands out in terms of product features. It adopts a 1:1 mixing method, with fast curing speed, and can further accelerate the curing process through heating, effectively improving production efficiency. At the same time, the product has low viscosity, can achieve rapid self leveling, and has a low shrinkage rate, ensuring stable screen quality after bonding. It is particularly worth mentioning that it has excellent optical performance and good adhesion to the substrate, providing strong guarantee for screen display effect and service life.
From the product parameters, both components A and B of IOTA 6650OCR are transparent, with a viscosity between 800-1200 mPa · s and a density of 0.98 ± 0.02 g/cm ³. The mixing ratio is 1:1, and the viscosity remains at 800-1200 mPa · s after mixing. The operating time at 25 ℃ is greater than 10 minutes. In terms of performance, the cone penetration (1/4 cone) is 35-45 (1/10mm), the shear strength of glass glass is greater than 0.4 MPa, and the tensile strength is greater than 0.3 MPa. In terms of optics, the yellowing index is less than 0.2, Haze＜0.2， Light transmittance>99%, refractive index 1.405, wide temperature range of use, up to -45~200 ℃, can adapt to different environmental needs.
In terms of operation and safety, this product has clear specifications. Before sealing, solvents such as alcohol and acetone should be used to remove surface oil stains and dust; A. After mixing component B evenly in a 1:1 ratio, it should be quickly infused and it is recommended to remove bubbles under vacuum; The large proportion deviation will easily lead to improper hardness of gel, which needs to be strictly proportioned. Due to being an additive curing system, the curing speed is only temperature dependent. At the same time, it should be noted not to come into contact with substances containing N, P, S, Sn, Pb, etc., in order to avoid affecting the curing process. Unused rubber materials should be stored in a sealed manner. Operators who come into contact with them for a long time or repeatedly should wear protective gloves and stay away from heat sources, sparks, etc. Explosion proof equipment should be used. This product does not contain toxic or corrosive substances and is transported as non hazardous goods.
On the packaging, IOTA 6650OCR provides two specifications of A component/B component 20KG and 180KG. Storage should be in a dry place, with a storage period of 12 months. After expiration and passing re inspection, it can continue to be used. Transportation should be treated as general chemicals.
The launch of IOTA 6650OCR, with its many excellent performance and convenient usage characteristics, is expected to play an important role in the field of full screen lamination and promote further upgrades in the production technology of related display devices.
To learn more, please click
IOTA6650OCR.
