With the continuous development of the electronics industry, the requirements for protective materials for electronic devices are increasing day by day. In this context, IOTA 6250LC silicone gel stands out by virtue of its excellent performance and becomes a highlight in the field of electronic protection.
This product is convenient to operate. Before use, mix components A and B in a 1:1 ratio thoroughly and stir for 5 minutes. It is recommended to defoam under a vacuum of -0.09MPa~-0.08MPa for 5-10 minutes before use. The curing speed is temperature dependent. It does not flow after 120 minutes at 25 β, and can be fully cured in 30 minutes at 120 β, which can meet the needs of different production rhythms.
In terms of safety and storage, IOTA 6250LC is classified as a non hazardous material, but attention should be paid to avoid ingestion and eye contact. If accidentally splashed, rinse with plenty of water. At the same time, it is necessary to avoid contact with compounds containing N, P, S and other elements to prevent platinum catalyst poisoning from affecting solidification. The product packaging comes in two sizes: 20KG and 200KG. Components A and B must be sealed and stored in a dry place for a storage period of 12 months. After expiration and passing the re inspection, they can continue to be used and transported as general chemicals.
The appearance of IOTA 6250LC organic silicon gel provides strong support for reliable protection of electronic equipment and is expected to play an important role in the electronic industry.
To learn more, please click
IOTA6250LC
