Home    Products    Silicone Gel    Silicone Gel IOTA GNJ 3126

Details Information
Recommend

Silicone Gel IOTA GNJ 3126

Product Description
This product is a two-component addition molding silicone transparent gel, with good waterproof, moisture-proof, anti-corrosion performance and excellent weather aging resistance.  

Product Features
Two component silicone addition silicone gel, which can be cured at room temperature or heated quickly;
Excellent low-temperature resistance, good high-temperature aging resistance, and excellent insulation performance;  
Low stress, maintaining elasticity over a wide temperature range after curing, making it easier to repair;
High transparency, long-term resistance to yellowing;
No by-products are generated during solidification, no solvents are used, and deep solidification can be achieved;  
It has good waterproof, moisture-proof and anti-aging properties.

Product Use
Moisture proofing for electronic components, internal covering materials for transistors and integrated circuits, elastic adhesives for optical instruments, and transparent packaging for rain sensors.

Typical technical indicators

Physical properties before mixing (22 ℃, 50% RH)

Component 

A

B

Viscosity (cp) 

25000±4000

21000±4000

Physical properties after mixing (22 ℃, 50% RH) 

Mixing ratio (weight ratio) 

A:B=1:1

Color 

transparent 

Viscosity after mixing (cp) 

22000±4000

Operation time (min, 22 ℃)

≤60 

Curing time (min, 22 ℃)

240

Curing time (min, 80 ℃)

30 

After curing (22 ℃, 50% RH)

Cone penetration (mm/10) 

≤75 

Density (g/ml) 

0.98

Transmittance (%) 

≥95 

Volume resistivity (Ω· cm) 

>1.0×1014 

Viscosity and curing time can be adjusted according to user requirements

Instructions for use
1) Before use, the materials should be cleaned to ensure they are dry and free of contaminants.  
2) A and B components are mixed in a 1:1 weight ratio, and it is recommended to vacuum defoam before applying to the target component.
3) Heating and curing can improve production rate and adhesion between substrates.  

Precautions
1) Please use up the mixed adhesive material at once to avoid waste.  
2) When the adhesive comes into contact with a certain amount of organic compounds such as N, P, S, as well as ionic compounds of elements such as Sn, Pb, Hg, As, it can cause poor hardening. Therefore, do not mix these substances into it.  
3) Before use, please keep the product sealed and store it in a dark place.  

Packaging
IOTA GNJ 3126: Component A 15kg/barrel, Component B 15kg/barrel

Storage
This product can be stored for 12 months in a cool, ventilated, and dry place.  

Transportation
This product belongs to non hazardous materials and can be transported as a general chemical.


Online QQ Service, Click here

QQ Service

What's App